Carrier Blower Motor HB44TQ125 1/2 HP

Carrier HB44TQ125 Blower Motor | 1/2 HP, 1075 RPM, 5-Speed

Restore dependable, multi-speed air delivery to your heating and cooling equipment with the Carrier HB44TQ125 Blower Motor. This Genuine OEM Factory Authorized Part is a premium PSC (Permanent Split Capacitor) induction motor engineered to meet the exact physical and electrical profiles required for Carrier, Bryant, and Payne residential furnaces and air handlers.

Technical Specifications

  • Part Number: HB44TQ125
  • Motor Type: PSC Induction Motor
  • Horsepower: 1/2 HP
  • Speed: 1075 RPM (5-Speed)
  • Voltage: 208/230 VAC
  • Amperage: 7.40 A
  • Phase: 1 PH

Direct Replacement & Compatibility

The HB44TQ125 serves as the factory-authorized direct successor for several legacy motor designs. Selecting a Factory Original part guarantees that the physical frame size, belly-band mounting dimensions, shaft length, and electrical lead wire colors align precisely with your existing system, eliminating the complex troubleshooting or modifications associated with universal aftermarket motors.

  • Replaces / Supersedes Part Numbers: HB43TR125, HC43TE125, 0015009239725
  • Manufacturer Cross-Reference: GE / Genteq 5KCP39LGUA12S, D916-RF067444
  • Equipment Brands: Carrier, Bryant, and Payne.
  • Application: Residential and light commercial indoor gas furnaces, fan coils, and air handlers.

Why Choose Genuine Carrier OEM?

Standard PSC blower motors run continuously under heavy static pressure loads to maintain proper cubic feet per minute (CFM) across your heat exchanger or cooling coil. Substandard universal replacements often pull higher amperage than rated, causing the motor to overheat and short out prematurely. This Genuine Carrier motor is engineered for low vibration, minimal noise, and strict thermal compliance, ensuring long-term reliability and efficient operation.

Shipping Information

  • Service Area: Shipping rates apply to the continental United States only.

Pro-Tech Installation & Wiring Tip: When installing a multi-speed PSC motor, proper wire configuration and capacitor maintenance are essential.

  • Capacitor Maintenance: Check the rating plate on the new motor to verify its specific run capacitor microfarad (µF) requirement. Always install a new, matching run capacitor when replacing a blower motor to prevent the motor from starting poorly, overheating, or dropping speed taps.
  • Speed Taps: This motor features 5 distinct speed taps to handle different heating, cooling, or continuous fan requirements. Unused speed leads must be individually insulated with wire nuts or parked on dead terminals on your system's control board to prevent electrical short circuits.
  • Clearance: Before restoring power, secure the motor firmly within its mounting bracket, verify the blower wheel set screw is tightened securely onto the flat part of the motor shaft, and spin the assembly by hand to check for smooth clearance within the housing.

$416.00

Add to Cart:
  • Model: HB44TQ125
  • Manufactured by: Carrier
Ask a Question

Manufacturer Info



Customers who bought this product also purchased...